SUBSURFACE
Toro DL2000tm Series Irrigation System      
Features      
bulletROOTGUARD® protection using the pre-emergent TREFLAN® is non-toxic
and guards against root intrusion by diverting root growth away from the emitter outlet.
bulletTREFLAN is impregnated during the manufacturing process and requires virtually
no maintenance
bulletDTech self-cleaning emitters for precise, trouble-free water application
bulletFlexible, sturdy design to fit into unusual spaces
bulletEasy to install and requires minimal maintenance
bulletCan be installed at grade or buried 4"-8" underground, delivering irrigation directly
at the plant's root zone
bulletChoice of pressure-compensating or non-pressure-compensating dripline with 12"
or 18" emitter spacing
bullet1/4" microline tubing available in 12" spacing for small, tight areas
bulletEmitters are inseparably welded to the inside wall of durable polyethylene dripline
tubing during manufacturing
bulletWithstands acids down to pH2 as well as fertilizers, chemicals and chlorine
bullet2 flow rates, 0.53 and 1.02 GPH
bulletPressure regulators maintain a constant pressure from 15-40 PSI
bulletApproved fertilizers and chemicals can be added at a central inlet and flow directly
to the root zone
bulletDistinctive red stripes on dripline signifies Toro quality
   
Maximum Recommended 5/8" DL2000 Dripline Length     1/4" DL2000 Microline
Pressure-Compensating Non-Pressure-Compensating     Maximum Recommended
GPH PSI Spacing Flow Max. Run GPH PSI Spacing Flow Max. Run     Microline Length
0.53 25 12" 0.53 354' 0.53 25 12" 0.67 254'       12"
0.53 40 12" 0.53 450' 0.53 40 12" 0.90 211*     Dripper Flow 0.53
0.53 25 18" 0.53 502' 0.53 25 18" 0.67 345'     Max. Run @ 20 PSI 33'
0.53 40 18" 0.53 640' 0.53 40 18" 0.90 286'*     Note: Use your inlet pressure and the friction
1.02 25 12" 1.02 234' 1.02 25 12" 1.20 175'     loss charts below to determine maximum run
lengths.
1.02 40 12" 1.02 300' 1.02 40 12" 1.48 153'*        
1.02 25 18" 1.02 331' 1.02 25 18" 1.20 238'        
1.02 40 18" 1.02 425' 1.02 40 18" 1.48 208'*        
*With non-pressure-compensating dripline, maximum run lengths decrease slightly at higher pressures.
Calculations are based on 0% slope.
       

 

   
Specifying Information
RGX X XX XX
Description Pressure Compensation Flow Spacing Size
DL2000 Dripline
w/ROOTGUARD
P-Pressure-Compensating 2-.53 GPH 12-12" Dripline 01-100' Roll
N- Non-Pressure-Compensating 4-1.02 GPH 18-18" Dripline 03-300' Roll
        05-500' Roll*
        10-1000' Roll
For Example:
When specifying a 1000' roll of pressure-compensating dripline with ROOTGUARD,
12" emitter spacing and 0.53 GPH, you would specify:
RGP-212-10
*Non-pressure-compensating dripline is available in 500' rolls only
   
Specifying Information
Model Number Description
MCRG-212 DL2000 100' Roll, 1/4" Pressure-compensating Microline Dripline
w/ROOTGUARD®, 12" Emitter Spacing, 0.53 GPH
A complete line of DL2000 components is also available. Please contact your Toro distributor.

 

The Toro Company Irrigation Division An ISO 9001-Certified Factility
PO Box 489 Riverside, CA 92502 Phone (800) 654-1882

ROOTGUARD is a registered trademark of A.I. International and manufactured under U.S. patent no. 5116414.
TREFLAN is a registered trademark of Dow Elanco
©1996 The Toro Company All Rights Reserved

back

Controller Training Programs

 

Interactive GEO Controller Training Program

This is a .zip file and may take a few minutes to download

 

 

 

Printed GEO Controller Training Program

Print this out and work through it at your controller